OmniFocus 200 Series Installation and Operation Guide
200 Series
Information
This section contains product specifications, troubleshooting tips, and support information.
Maintenance
Lens Care
The bright light of the projector exaggerates the amount of dust on the lens surface. Dust
has very little effect on picture quality and can be blown off or wiped away with a cloth. We
recommend cleaning the lens ONLY if there are fingerprints or similar on the lens.
To clean:
1. Use a soft lint-free lens tissue or cotton cloth.
2. The Elumenati recommend PUROSOL™ Optical Cleaner from Edmund Optics; however,
any high-quality camera optics cleaning fluid will work.
Do not use acetone-based
solvents.
●
Tip:
In an emergency, Windex™ and a soft cotton t-shirt will work, but be careful!
3. Apply the cleaning fluid directly onto the tissue until moistened. Wipe gently until the lens
is clean. To avoid scratching the lens, make sure that the tissue is always moist and do not
scrub with excessive force.
4. When the lens is clean, finish with a light-pressure, single sweep across the surface of the
lens using a drier portion of the tissue. Discard the tissue after every use.
Troubleshooting
Product Support
Please contact us with your questions via email at
888-384-3826, extension 2.
Elumenati, GeoDome OmniFocus and OmniMap are all trademarks of The Elumenati LLC.
