OmniFocus 200 Series Installation and Operation Guide
200 Series
Setup
The 200 Series is shipped with the adjustable lens mount already installed and aligned to
the default setting (truncated or fulldome). The lens is removed from the mount and housed
separately inside the case. The following describes the setup procedure.
Projector Connection
Before attaching the Elumenati lens, set up and/or install the projector and connect the pro-
jector to the video source. Please refer to the WUX4000 manual for details on projector op-
eration.
1. Connect either the DVI or HDMI cable from the computer to the projector (Fig. 3). Con-
nect power cable. Turn on the projector and aim at any flat surface more than three (3)
feet away.
2. Turn on your computer.
3. Press the “input” button on the remote control or the projector control panel and choose
“Digital PC” input signal.
●
You may need to adjust the focus and/or zoom at first in order to read the image. On
the control panel cycle through Focus, Zoom and Shift by repeatedly pressing the Lens
button.
●
Note that the arrow keys used for adjustment are slow to respond. Press and hold for
one second before expecting to see changes.
Elumenati, GeoDome OmniFocus and OmniMap are all trademarks of The Elumenati LLC.
(Fig. 3) Control Panel of the WUX4000
