7-
DMX Address
Select
DMX Address
, press the
ENTER
button to confirm, the present address will blink on
the display. Use the
UP
and
DOWN
button to adjust the address from
1
to
512
. Once the
address has been selected, press the
ENTER
button to setup, to go back to the functions
without any change press the
MENU
button again.
Hold and press the
MENU
button about
one second or wait for one minute to exit the menu mode.
Show Mode
Select
Show Mode
, press the
ENTER
button to confirm, present mode will blink on the
display. Use the
DOWN
and
UP
button to select the
Show 1
or
Show 2
or
Show 3
or
Show
4
mode. Once the mode has been selected, press the
ENTER
button to setup, to go back to
the functions without any change press the
MENU
button again.
Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Slave Mode
Select
Slave Mode
, press the
ENTER
button to confirm, present mode will blink on the
display. Use the
DOWN
and
UP
button to select the
Slave 1
(normal) or
Slave 2
(2 light
show) mode. Once the mode has been selected, press the
ENTER
button to setup, to go
back to the functions without any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Black Out
Select
Slave Mode
, press the
ENTER
button to confirm, present mode will blink on the
display. Use the
DOWN
and
UP
button to select the
Yes
(yes blackout) or
No
(no blackout)
mode. Once the mode has been selected, press the
ENTER
button to setup, to go back to
the functions without any change press the
MENU
button again.
Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
Sound State
Select
Sound State
, press the
ENTER
button to confirm, present mode will blink on the
display. Use the
DOWN
and
UP
button to select the
On
(sound on) or
Off
(sound off) mode.
Once the mode has been selected, press the
ENTER
button to setup, to go back to the
functions without any change press the
MENU
button again. Hold and press the
MENU
button about one second or wait for one minute to exit the menu mode.
12-
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in master mode
Show Mode
and select
show 1
or
show 2
or
show 3
or
show 4
mode. Its DMX input jack will have nothing plugged
into it, and Its master LED will be constantly on and sound LED will flash to the music. The
other units will have to set in
slave mode
and select
Slave 1
(normal) or
Slave 2
(2 light
show) mode, Their DMX cables plugged into the DMX input jacks (daisy chain) and the
slave led lights will constantly on.
2-light show
In
slave mode
,
Slave 1
means the unit works normally and
Slave 2
means 2-light show. In
order to create a great light show, you can set
Slave 2
on the second unit to get contrast
movement to each other, even if you have two units only.
4.2 Easy Controller (By CA-8/CA-9 RTX)
The easy remote control is used only in master/slave mode. By
connecting to the 1/4” microphone jack (For CA-8) or 5-pin socket (For
CA-9RTX) of the first unit, you will find that the remote controller on the
first unit will control all the other units in Stand by, and Mode selection.
Stand By
Blackout the unit
Function
1. Sync. Strobe
2. Async strobe
3. Sound Strobe
Show
1-4
1. Pan index
2. Tilt index
3. Dimmer
Fade Speed
1. Fast
2. Middle
3. Slow
Mode Sound
(LED OFF)
Show
(LED Slow Blinking)
Show
(LED Fast Blinking)
LED ON
