Elumen8 Kudos 108, Руководство пользователя

Страница: 10 / 10

9-
change press the MENU button again. Hold and press the MENU button about one second
or wait for one minute to exit the menu mode.
White Balance
Select White Balance , press the ENTER button to confirm, present mode will blink on the
display. Use the DOWN and UP button to select the Red or Green or Blue . Once the mode
has been selected, press the ENTER button to setup, use the DOWN and UP button to
change the value (125~255). Once the mode has been selected, press the ENTER button to
setup, go back to the functions without any change press the MENU button again. Hold and
press the MENU button about one second or wait for one minute to exit the menu mode.
Manu Test
Select Manu Test , press the ENTER button to confirm, present mode will blink on the
display. Use the DOWN and UP button to select the Pan/ Tilt / Red / Green / Blue/ White/
Dimmer or Strobe . Once the mode has been selected, press the ENTER button to setup,
use the DOWN and UP button to change the value (0~255). Once the mode has been
selected, press the ENTER button to setup, go back to the functions without any change
press the MENU button again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
Auto-Test
Press the MENU button up to when the Auto-Test is blinking on the display. Pressing
ENTER button and the unit will run self-test by built-in program. To go back to the functions
press the MENU button again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
Temperature
Press the MENU button up to when the Temperature Test is blinking on the display.
Pressing ENTER button and the display will show the temperature of the unit. To go back to
the functions press the MENU button again. Hold and press the MENU button about one
second or wait for one minute to exit the menu mode.
Fixture Time
Press the MENU button up to when the Fixture Time is blinking on the display. Pressing
10-
ENTER button and the display will show the number of working hours of the unit. To go back
to the functions press the MENU button again. Hold and press the MENU button about one
second or wait for one minute to exit the menu mode.
Firmware Version
Press the MENU button up to when the Firmware version is blinking on the display.
Pressing ENTER button and the display will show the version of software of the unit. To go
back to the functions press the MENU button again. Hold and press the MENU button about
one second or wait for one minute to exit the menu mode.
Defaults Setting
Press the MENU button to show Defaults on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the YES or No . Once the Yes has
been selected, press the ENTER button and use the UP and Down button to select the PRO
Defaults or AUTO Defaults .
PRO Defaults : For professional users, detailed explanation as followings:
)
Slave Mode
Æ
Slave 1
)
Black Out
Æ
Yes
)
Sound State
Æ
Off
) Pan Inverse Æ
No
) Tilt Inverse Æ
No
) Back Light Æ
Off
) Function Delay Æ
3S Delay
AUTO Defaults : Mostly automatic mode, for non professional users, detailed
explanation as followings:
) Slave Mode Æ
Slave 1
) Black Out Æ
No
) Sound State Æ
On
) Pan Inverse Æ
No
) Tilt Inverse Æ
No
) Back Light Æ
On
) Function Delay Æ
3S Delay