Eltron Strata LP2684 страница 42 Скачать руководство пользователя

Страница: 42 / 64

Cleaning Your

Printer

The user has easy access to all of the printer’s

media path areas to allow for cleaning and

clearing of media jams. The user can clean the

sensor areas, print head, platen roller and areas

adjacent to the media path surfaces.

Warning -Shock Hazard

- See page vi.

Always turn the printer off before cleaning.

The media path surfaces (except the print head)

can be cleaned with a lint free, clean, damp

cloth very lightly moistened with medical grade

alcohol. Alcohol may be used to help remove

any adhesive or label material buildup.

Warning - Static Discharge - See page vi.

Never touch the print head. Always clean the

print head with a cleaning pen (to protect the

print head from static discharge and fibers).

If a label has become jammed in the printer,

remove the label and any adhesive residue,

immediately. Adhesive may spread through out

the printer’s media path if not completely

removed. Many adhesives are permanent and

have short “set” times.

980181-001 Rev.B

Operation

Cleaning Your

Printer

The user has easy access to all of the printer’s

media path areas to allow for cleaning and

clearing of media jams. The user can clean the

sensor areas, print head, platen roller and areas

adjacent to the media path surfaces.

Warning -Shock Hazard

- See page vi.

Always turn the printer off before cleaning.

The media path surfaces (except the print head)

can be cleaned with a lint free, clean, damp

cloth very lightly moistened with medical grade

alcohol. Alcohol may be used to help remove

any adhesive or label material buildup.

Warning - Static Discharge - See page vi.

Never touch the print head. Always clean the

print head with a cleaning pen (to protect the

print head from static discharge and fibers).

If a label has become jammed in the printer,

remove the label and any adhesive residue,

immediately. Adhesive may spread through out

the printer’s media path if not completely

removed. Many adhesives are permanent and

have short “set” times.

980181-001 Rev.B

Operation

Содержание Strata LP2684

































































Результаты поиска

Содержание Strata LP2684

Отзывы:

Похожие инструкции для Strata LP2684

Бренды по названию

Популярные бренды

Eltron Strata LP2684, Руководство пользователя

Результаты поиска

Содержание Strata LP2684

Отзывы:

Похожие инструкции для Strata LP2684

Бренды по названию

Популярные бренды