Eltron Strata LP2684 страница 44 Скачать руководство пользователя

Страница: 44 / 64

Cleaning Under

the Sensor Bracket

The transmissive (gap) sensor swivel bracket

can pivot up for easy cleaning.

Step 1

Open the print head carriage.

Step 2

Open the sensor bracket. Pull the slide lock to

the left and lift the front of the bracket up.

Step 3

Clean the metal part of the bracket, only. The

sensor is recessed to protect it from labels and

adhesive.

Clean the clear sensor window below the sensor

bracket. Do not use abrasive cleaning materials.

Only use medical grade alcohol or water on a

lint free, clean, damp cloth very lightly mois-

tened. Let dry. Verify that the window is clear of

streaks and clouding.

Step 4

Swing the sensor bracket down to close. The

slide lock will automatically lock when in posi-

tion.

Close the print carriage.

980181-001 Rev.B

Operation

Transmissive (Gap)

Sensor Bracket

Slide Lock

Cleaning Under

the Sensor Bracket

The transmissive (gap) sensor swivel bracket

can pivot up for easy cleaning.

Step 1

Open the print head carriage.

Step 2

Open the sensor bracket. Pull the slide lock to

the left and lift the front of the bracket up.

Step 3

Clean the metal part of the bracket, only. The

sensor is recessed to protect it from labels and

adhesive.

Clean the clear sensor window below the sensor

bracket. Do not use abrasive cleaning materials.

Only use medical grade alcohol or water on a

lint free, clean, damp cloth very lightly mois-

tened. Let dry. Verify that the window is clear of

streaks and clouding.

Step 4

Swing the sensor bracket down to close. The

slide lock will automatically lock when in posi-

tion.

Close the print carriage.

980181-001 Rev.B

Operation

Transmissive (Gap)

Sensor Bracket

Slide Lock

Содержание Strata LP2684

































































Результаты поиска

Содержание Strata LP2684

Отзывы:

Похожие инструкции для Strata LP2684

Бренды по названию

Популярные бренды

Eltron Strata LP2684, Руководство пользователя

Результаты поиска

Содержание Strata LP2684

Отзывы:

Похожие инструкции для Strata LP2684

Бренды по названию

Популярные бренды