ELTRA CHS-580A, Руководство по эксплуатации и обслуживанию

Страница: 7 / 35

7
Before installing the analyser with the loader, ensure that sufficient space of 220

80 cm is
available. It is suggested to place the analyser in a position where the front end of the housing (1)
has a distance at least 5 cm to the front end of the desk, otherwise there will not be enough space
for placing the crucibles bin (3) on the desk.
NOTICE
Under no conditions should the analyser and loader be placed in direct sunlight or be exposed to
the wind of air conditioners or to the wind blowing through open windows and doors
1.3 Connecting and disconnecting plastic tubes
The plastic tubes are connected by pushing them into the fittings. To connect the tube, simply push
it into the fitting as far as it would go.
Fig. 3: Connecting plastic tubes
To disconnect the tube, first press the plastic ring of the fitting up to the metal ring, keep it properly
pressed and pull the tube.
Fig. 4: Disconnecting plastic tubes
Pos : 1. 3 / 0010 ELTR A/------- Seit enumbruc h ----------- @ 6\ mod_1368796429449_0.doc x @ 41468 @ @ 1