ELTRA CHS-580A, Руководство по эксплуатации и обслуживанию

Страница: 26 / 35

Step by step
26
Top view Front view
To adjust the position of the arm in this direction the whole assembly of the arm support
(pneumatic cylinder and geared motor) is moved. Take a lot of care to move the assembly
horizontally and avoid the tilt of the arm.
Top view Side view
To adjust the position of the arm in this direction the whole angle is moved, where the arm
support assembly is fixed on, as well as vertical Laser and sensor. Take a lot of care to move
the angle horizontally and avoid the tilt of the arm also in this direction.
The adjustment should be checked once again, when the arm goes down, after pressing the
adjustment button once again (step 10 of the sequence). At next press on the button fingers will
close. If the crucible does not move, when fingers close, the adjustment is correct.