eltherm ELT-GP1, Документация

Страница: 7 / 14

BU-020 Operating Instructions for
Temperature Controller ELT-GP1
Revision 4 20.12.2018
Page 6 of 10
3. General Safety Instructions
3.1 Proper use
In its standard configuration, the temperature controller ELT-GP 2 is a two-position controller
used to control electric heaters. The controller also indicates temperature deviations of the
heater and any faults which may occur in the temperature probes used for this purpose. Any
other use above and beyond that is deemed improper use. Your temperature controller is
state of the art and has been built in compliance with recognized safety regulations. Its
assembly and use can nevertheless constitute a hazard to persons or cause impairment of the
unit and other material damage. The temperature controller must only be used when it is in
technically perfect working order, for the purpose for which it is intended, in awareness of all
safety and hazard aspects and in compliance with the information given in the User's Manual.
3.2 Hazards of electrical power
Work on electrical equipment must only be done by a qualified electrician or by duly trained
personnel under the instruction and supervision of a qualified electrician, in accordance with
all applicable electrical standards and regulations.
3.3 Modifications to the temperature controller
Do not modify the equipment or the software without the manufacturer's prior authorization.
Failure to comply will render all warranty claims null and void and we cannot give any
guarantees for trouble-free operation of the controller.