ELTEX MES3108, Руководство по эксплуатации, Страница: 190 / 243

190 MES3000 Ethernet switch series
no ip dhcp relay
information option
format­type
option
Restore the default value
ip dhcp relay information
option suboption-type
{tr101 | custom}
-/tr101
Option 82 format setting:
-
tr101 - set option 82 format according syntax adopted in TR-101
recommendations. (Table 5.212)
-
custom - set option 82 format according to format in Table
5.213
no ip dhcp relay
information option
suboption-type Restore the default value
VLAN interface configuration mode commands
Command line request in VLAN interface configuration mode appears as follows:
console# configure
console(config)# interface vlan { vlan_id }
console(config-if)#
Table 5.229 —VLAN interface configuration mode commands
Command Value Action
ip dhcp relay enable
The agent is disabled by
default.
Enable DHCP Relay agent for the configured interface.
no ip dhcp relay enable Disable DHCP Relay agent for the configured interface.
Ethernet interface configuration mode commands
Command line request appears as follows:
console(config-if)#
Table 5.230 —Ethernet interface configuration mode commands
Command Default value Action
ip dhcp relay information
policy {keep | replace |
drop | global}
-/global
Define the processing mode for DHCP packets with Option 82.
-
keep — skip packets unchanged
- replace —replace the Option 82 content
- drop —drop packets with Option 82
Port values have a higher priority compared to the global setting.
EXEC mode commands
Command line request in EXEC mode appears as follows:
console#
Table 5.231 —EXEC mode commands
Command Action
show ip dhcp relay Show the DHCP Relay agent configuration for the switch and for interfaces separately, and also the
list of available servers.
Example execution of commands

Show DHCP Relay agent function status:
console# show ip dhcp relay
DHCP relay is Enabled
DHCP relay is not configured on any vlan.