13. MODE BUTTON
Press it to select RADIO, DISC, CARD (after inserting MMC/SD card), USB (after inserting USB bar) mode.
14/15.MMC/SD COMPARTMENT and USB SOCKET and THEIR OPERATION
When needing to do MMC/SD or USB playing, insert the MMC/SD card or USB bar into MMC/SD compartment
or USB socket. Then the playing mode will be changed into MMC/SD or USB mode and display CARD or USB
on LCD (When MMC/SD card and USB bar are both inserted into their compartment or socket, the playing
mode will be changed into the mode of the latter one), and then play the first track of MMC/SD or USB.
16. OPEN BUTTON
Press it to flip down the front panel from the unit chassis. Then remove away the front panel from the player. And
then you can press the RESET button to resume the distorted program when the LCD displays wrongly or the
buttons are not available or insert disc into disc compartment or eject disc.
17. CLOCK BUTTON
(1) RADIO MODE
When RDS DATA is received, press it shortly and repeatedly to display the following items alternatively:
PS NAME --> CLOCK --> FREQUENCY --> PTY -->
When RDS DATA is not received, press it shortly and repeatedly to display the following items alternatively:
FREQUENCY --> CLOCK --> PTY -->
(2) MMC/SD, USB or DISC MODE
Press it shortly to display time for 5 seconds, and then it returns to its previous display unless the button is
pressed again.
(3) Time adjustment
From the clock mode, press it hold for more than 1 second to flash time and then rotate VOL knob to adjust
hour or minute.
18. SCAN BUTTON
Press it to scan up by one channel step with station detection. If a valid signal has detected, the current frequency
is blinked within 5 seconds. Then press it again to stop scan and remain the current frequency; otherwise, the unit
continue to scan up by one channel step with station detection 5 seconds later.
PRECAUTIONS AND MAINTENANCE
1. If the car interior is extremely hot, as after being parked in the sun, do not use the player until the car has been
driven for a while to cool off the interior.
2. The protective case is to safely keep the front panel.
3. The unit is designed for negative terminal of the battery which is connected to the vehicle metal. Please confirm it
before installation.
4. Do not allow the speaker wires to be shorted together when the unit is switched on. Otherwise it may overload or
burn out the power amplifier.
5. Do not install the detachable panel before connecting the wire.
020.
Schutzhülle
Bedienfeld
01-7538N-GE-EN 7/29/06 11:45 AM Page 020
