DIGITAL ANTI-SHOCK OPERATION
The DIGITAL ANTI-SHOCK PROTECTION function uses semiconductor memory to prevent
the second from skipping when the unit is subjected to shocks and vibration during play.
When the PLAY/PAUSE button is pressed and the power turns on, the “ASP” appear and the
digital Anti-Shock Protection function turns on automatically.
It will give approximately 40 seconds for CD and 120 seconds for MP3(128 Kbps bit rate) of
protection against interruption of sound output, if the player is subjected to shocks of more than
40 seconds duration, some interruption of sound output will occur, this is normal and to be
expected, the sound will resume once the player has stabilized from the shock.
To turn this function off, press the ASP/DIR UP button once, the “ASP” indicator will disap-
pear, press again the “ASP” appear in the display.
COMPACT DISC CASSETTE ADAPTOR
The cassette adaptor allow you to use your portable CD player with your car stereo cassette
system or portable audio cassette system.
1. Place the cassette adaptor so the cord extends out from the cassette player when the cassette
is inserted. Insert the cassette adaptor in the same direction as you would insert an audio
cassette tape.
2. Insert the cassette adaptor stereo plug into the headphone jack of the CD player.
3. Turn on the cassette player. Press play on the cassette player
4. Press play on the CD player.
5. Set the volume of the CD player to a mid-level. Adjust the volume of the cassette player.
Notes
•
The cassette adaptor has the play head on one side only. If you insert the cassette an no sound
is heard, try turning the cassette over or pressing the reverse button of the cassette player to
— 5 —
change direction.
•
The car cassette adaptor may not be compatible with all makes and models of cassette
players.
DC cigarette lighter power adaptor
Use the DC cigarette lighter power adaptor to conserve battery life when using the CD player in
a car.
1. Plug the adaptor into the car cigarette lighter.
2. Plug the pin into the 4.5V DC jack of the unit
BBS (BASS BOOST SYSTEM) FUNCTION
Set the BBS switch to on position to enhance the bass effect.
LOW BATTERY ALERT
When the battery indicator appears on the display, please prepare for replace the new
batteries.
— 4 —
B. Intro Scan
During PLAY mode
•
Press the MODE/PROG button four times.
•
The INTRO indicator will appear in the display.
•
Press the PLAY button to play the first 10 seconds of each file on the disc.
NOTE
-
To cancel INTRO SCAN simply press the MODE/PROG button until the INTRO
indicator disappears.
C. Random Play
During PLAY mode
•
Press the MODE/PROG button five times.
•
The SHUF will appear in the display.
•
Press the PLAY button, all the files on a disc to be played in a random sequence and after
all files are played, system will stop automatically.
NOTE
-
To cancel RANDOM PLAY simply press the MODE/PROG button until the SHUF
display disappears.
PROGRAM PLAY (FOR CD )
1. In stop mode, press the MODE/PROG button to make program memory.
2. “ PGM 00 01” will be displayed, “00” means track number to memory and “01” means
program number.
3. Press
or
button to select the desired track.
4. Press the MODE/PROG button to enter the track into memory, the program numbers
which will be increment one step.
* The program no. “01” has become “02” on the display.
5. Repeat step 3 and 4 until memory is full. (64 tracks)
6. Press
button to start the program play.
7. To stop the program play, press the STOP button.
8. For program play in step “ 7 ” , press the MODE/PROG button &
button.
9. To check the program memory, in program play mode, press the
or
button.
10. To erase the program memory, open the door or turn off the power.
PROGRAM PLAY (FOR MP3 DISC)
1. In stop mode, press the MODE/PROG button to make program memory.
2. “ PGM 000 01 ” will be displayed. “ 000 ” means file number, “01” means program number.
3. Press the DIR UP/ ASP button to select the desired directory, the display will become “
00101
01
” , “
01
” means directory number.
4. Press
or
button to select the desired file.
5. Press the MODE/PROG button to enter the directory and file into memory.
The program number which will be increment one step.
* The program no.“01” has become “02” on display.
6. Repeat step 3 to 5 until memory is full (64 files ).
7. Press
button to start the program play.
8. To stop the program play, press the STOP button.
9. For program play in step “ 8 “, press the MODE/PROG button &
button.
10. To check the program memory, in program play mode, press the
or
button.
11. To erase the program memory, open the door or turn off the power .
* If you do not need to select directory, only select files, the above step 3 can pass.
— 3 —
Various Playing Modes
MODE/PROG Button — There are 3 kind of function : (FOR CD)
A. Repeat Play
During PLAY mode
•
Press the MODE/PROG button once to play current track repeatedly.
•
The repeat indicator
1
will appear in the display.
During PLAY mode
•
Press the MODE/PROG button twice to play the entire disc repeatedly.
•
The repeat indicator
ALL
will appear in the display.
NOTE
-
To cancel REPEAT simply press the MODE/PROG button until the repeat indicator
disappears.
B. Intro Scan
DURING PLAY mode
•
Press the MODE/PROG button three times.
•
The INTRO indicator will appear in the display.
•
Press the PLAY button to play the first 10 seconds of each track on the disc.
NOTE
-
To cancel INTRO SCAN simply press the MODE/PROG button until the INTRO
indicator disappears.
C. Random Play
DURING PLAY mode
•
Press the MODE/PROG button four times.
•
The SHUF indicator will appear in the display.
•
Press the PLAY button, all tracks on the disc will be played in random sequence. After all
the tracks have been played the system will stop automatically.
NOTE
-
To cancel RANDOM PLAY simply press the MODE/PROG button until the SHUF
display indicator disappears.
MODE/PROG Button — There are 3 kind of function : (FOR MP3 DISC)
A. Repeat Play
1. During PLAY mode
•
Press the MODE/PROG button once to play the current track repeatedly.
•
The repeat indicator
1
will appear in the display.
2. During PLAY mode
•
Press the MODE/PROG button twice to play the current DIRECTORY repeatedly.
•
The repeat indicator
will appear in the display.
3. During PLAY mode
•
Press the MODE/PROG button three times to play the ENTIRE DISC repeatedly.
•
The repeat indicator
ALL
will appear in the display.
NOTE
-
To cancel REPEAT simply press the MODE/PROG button until the repeat indicator
disappears.
