8
How to set:
•
Using the buttons
and
set the wanted temperature in
increments of 0,1 °C
•
Touch the
button – the user will be moved to the point 5
5. Setting the actual time.
The screen looks as follows:
When the room panel is connected to the controlling valve module
through the Expert regulator, the actual time is synchronized automatically
with the regulator and the possibility to set in in the panel is blocked.
How to set:
•
Using the
buttonchoose the
day, hour and minute
, a suitable
segment of the screen will be blinking;
•
Using the buttons
and
set the wanted value,
•
Touch the
btton – the user will be moved to the main screen.
V. Additional information
.
During communication with the valve module or the controller, the
room panel receives additional information from the external devices,
which might be displayed on the main screen when pushing sequentially
the
button. If the button does not respond to the short touch, it is
caused by moving the processor into the battery saving mode. In such case
one should hold the button for about 2 seconds. Returning to the main
screen will take place after touching the
button.
Содержание ROOMSTER II RTx
Страница 11: ...11 ...
