Data Logger DL210
Elster-Instromet GmbH
7
2.3 Summary charts, List Structure (3)
Status
System
Û
SReg Total status register
U5
Û
Time
Time and with "
®
" to date
Û
to
Stat
Total momentary status
U6
MdTim Summer / winter time on/off
to
„E2“
Clr
Clear total status register
MCyc
Measurement cycle
« Service»
Logb. Log book
U7
Disp
Permanent display on/off
AudTr List of modifications
U8
Aut.V
Time to automatic display
changeover
PLogb PTB logbook
U8
SNo
Serial number DL210
ClrPL Clear PTB logbook
Vers
Software version
Chk
Checksum software
Service
Schnittstelle
Û
Bat.R Residual service life of battery
Û
GSM.N Network operator
Û
to
Bat.C Battery capacity
GSM.L GSM reception level
to
„System“
VBatM Modem battery voltage
StM
Modem status
„User“
St.SL Status of supplier's lock
P.Sta
Status PIN of SIM card (GSM)
Cod.S Supplier's combination
Pin
Entry of SIM-PIN
St.CL Status of customer's lock
Num.T Number of ringing tones before
accepting call
Cod.C Customer's combination
Bd.S1 Baud-rate identification, optical
interface
St.PL Status calibration lock
CW1.S Call window 1, start
AdjTm Correction factor, clock
CW1.E Call window 1, end
Save Backup of all data
CW2.S Call window 2, start
Clr.A Clear archives
CW2.E Call window 2, end
Clr.V Clear counters (incl. archives and
readout notes)
CW3.S Call window 3, start
Clr.X Execute restart
CW3.E Call window 3, end
Addr User-specific display
CW4.S Call window 4, start
diverse Value of the user-specific display
CW4.E Call window 4, end
Anzeigetest (alle Segment blinken)
CWTst "Test" call window
Resp1 Response to Message 1
Resp2 Response to Message 2
Send
Command: Send message now
Remarks:
·
For meaning of abbreviated designa-
tions: see Chapter
3 and Appendix
C
of the manual
·
Submenus are located under "U1" – "U9"
(see Chapter:
2.4.5
of the manual)