Data Logger DL210
12
Elster-Instromet GmbH
3.4 Clearing an alarm or a warning
The clearing of all past (!) messages in the status register S.Reg occurs in the list "
Status
"
under the display: "
Clr
". Clearing messages is only possible with an open calibration, manu-
facturer's or supplier's lock.
After calling by ENTER, an "0" is positioned right-justified in the display. The function is trig-
gered, i.e. all status registers are cleared, after switching to "1" with
-
or
¯
and terminating with
ENTER.
If messages are currently present, then they are recorded again directly after a clear. The de-
leted messages can still be called in the logbook.
Example:
Once the message is recognised (see previous chapter), it should also be cleared.
W S t a t u s
C l r 0
W S t a t u s
C l r 0
W S t a t u s
C l r 1
o k . S t a t u s
C l r 0
With the keys or select
the list "
Status
" and the point
"
Clr
" with the key (see ad-
jacent on the right)
Press the keys
and
simultaneously
.
(Skips to the entry function)
Set the value to "
1
" with the
key or .
Again press the keys
and
simultaneously
.
(Terminates the entry).
This clears all past alarm and warning messages. If no current alarm and warning mes-
sages are present, the symbols "A" and "W" in the display are also cleared.
