manualshive.com logo in svg

Elsteam MISTRAL, Руководство по эксплуатации и обслуживанию

Инструкция по эксплуатации Ravcore MISTRAL - это необходимый руководство для правильной настройки и использования устройства. Скачайте бесплатно руководство на русском языке с сайта manualshive.com, чтобы получить подробные инструкции по использованию и настройке вашего устройства Ravcore MISTRAL.

Поделиться
Скачать
background image

06/2022

| 29 | 

924EHUCE4.00 - Mistral

 Humidifier

6.1  BEFORE YOU START

Read this manual carefully before installing the equipment.

Inparticular,thesafetyinstructions,electricalrequirementsandcurrentregulationsforthemachineortheprocessinwhich

this device is involved must be observed.
The use and application of the information contained herein requires experience in the design and installation of humidification 

systems.Onlytheuser,integratorormanufacturerofthemachinecanbefamiliarwithalltheconditionsandfactorswhich
ariseduringinstallationandconfiguration,operationandmaintenanceofthemachineortheprocess,andassuchcanidentify
therelevantautomationequipmentandthecorrespondinginterlocksandsafetysystemswhichcanbeusedeffectivelyand
appropriately.Whenselectingautomationandcontrolequipmentandotherconnectedequipmentandsoftware,foraparticular
application,youmustconsiderallapplicablelocal,regionalandnationalstandardsand/orregulations.

   DANGER

RISK OF ELECTRIC SHOCK OR ELECTRIC ARC

• Only use electrically insulated measuring devices and equipment.
• Do not install the equipment while the power supply is connected.
• 

Cutoffthepowersupplytoallequipment,includinganyconnecteddevices,andremovethepowerfusesbeforeremoving
anycoversorhatches,orbeforeinstalling/uninstallingaccessories,hardware,cablesorwires.

• 

AlwaysuseaproperlycalibratedVoltmetertomakesurethesystemispoweredoff.

• 

Themaintenance,repair,installationanduseoftheequipmentmustonlybeentrustedtoqualifiedpersonnel.

• Do not touch the unshielded components or the terminals while they are live.
• Do not modify the product.
• Do not expose the equipment to liquids or chemicals.
• 

Makesurethereisaneffectiveearthconnection;ifthereisnot,earththeequipment.

• 

Beforepoweringuptheequipment,checkallthewiringconnections.

 WARNING

REGULATORY INCOMPATIBILITY

Makesurealltheequipmentusedandsystemsdesignedconformtocurrentlocal,regionalandnationalstandards.

6.2  CONNECTION BEST PRACTICE

6.2.1  Wiring best practices

   DANGER

RISK OF ELECTRIC SHOCK AND FIRE

• Do not use the device with loads greater than those indicated in the technical data section.
• Do not exceed the temperature and humidity ranges indicated in the technical data section.
• 

Providesafetyinterlocks(isolators)ofasuitablesizebetweenthepowersupplyandthehumidifier.

• Only use cables with a suitable cross-section as indicated in the section “Wiring best practices”.

Whenwiringthehumidifiers,observethefollowinginstructions:

• 

Makesuretheoperatingenvironmentandconditionsfallwithinthespecifiedvalues.

•  Use cables of a cross-section suited to the voltage and current requirements.

   DANGER

LOOSE WIRING CAUSES ELECTRIC SHOCKS AND OVERHEATING

Tighten the connections in compliance with the technical specifications relating to tightening torques.

 WARNING

REGULATORY INCOMPATIBILITY

Makesurealltheequipmentusedandsystemsdesignedconformtocurrentlocal,regionalandnationalstandards.

6. ELECTRICAL CONNECTIONS

Содержание MISTRAL

































































Отзывы:

Нет отзывов

Похожие инструкции для MISTRAL

OBH Nordica Pure Comfort User Manual preview
Pure Comfort
Бренд: OBH Nordica Страницы: 40
NScessity NSUH-342 Instruction Manual preview
NSUH-342
Бренд: NScessity Страницы: 4
Gardner Denver RNC25 Instruction Manual preview
RNC25
Бренд: Gardner Denver Страницы: 12
Vectra Fitness VUH-31 Monsoon User Manual preview
VUH-31 Monsoon
Бренд: Vectra Fitness Страницы: 20
Vitalmaxx HH19027-00000 Operating Instructions Manual preview
HH19027-00000
Бренд: Vitalmaxx Страницы: 6
resideo Honeywell Home HM700ADISTKIT Installation Instructions Manual preview
Honeywell Home HM700ADISTKIT
Бренд: resideo Страницы: 12
Comedes Demecto 20 Manual preview
Demecto 20
Бренд: Comedes Страницы: 15
Crane EE-5952 Manual preview
EE-5952
Бренд: Crane Страницы: 12
Bort 98292756 User Manual preview
98292756
Бренд: Bort Страницы: 62
Ideal Air 700869 Operator'S Manual preview
700869
Бренд: Ideal Air Страницы: 4
N'oveen UH101 User Manual preview
UH101
Бренд: N'oveen Страницы: 27
Munters ComDry M190Y Manual preview
ComDry M190Y
Бренд: Munters Страницы: 32
Carel UU01F1 User Manual preview
UU01F1
Бренд: Carel Страницы: 72
thermastor 4028600 Installation, Operation And Service Instructions preview
4028600
Бренд: thermastor Страницы: 10
thermastor Quest 335 Installation, Operation And Maintenance Instructions preview
Quest 335
Бренд: thermastor Страницы: 24
Ecor-Pro DRYFAN EPD30 User Manual preview
DRYFAN EPD30
Бренд: Ecor-Pro Страницы: 15
KEECOON KC-MH-023 Instruction Manual preview
KC-MH-023
Бренд: KEECOON Страницы: 6
OBH Nordica Pure Comfort Manual preview
Pure Comfort
Бренд: OBH Nordica Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды