manualshive.com logo in svg

Elsner Vari KNX 3L-TH-D, Установка и настройка

Поделиться
Скачать
Elsner Vari KNX 3L-TH-D Скачать руководство пользователя страница 42

41

Parameter setting

Sensor Vari KNX 3L-TH-D

 • Status: 19.10.2016 • Errors excepted. Subject to technical changes.

The behaviour of the switching output on release is dependent on the value of the pa-
rameter "Switching output sends" (see "Switching output")

6.6.

Twilight brightness threshold values

Activate the twilight threshold values required (maximum four). The menus for setting
the threshold values are displayed.

The reading of the brightness sensor 2 is relevant for the twilight threshold values. The
use of the total value of the brightness for the twilight threshold values is not possible.

6.6.1. Threshold values 1-4

Threshold value

Set, in which cases threshold values and delay times received are to be kept per object.
The parameter is only taken into consideration if the specification/ setting by object is
activated further down. Please note that the setting "After power restoration and pro-
gramming" should not be used for the initial start-up, as the factory settings are always
used until the first call (setting via objects is ignored).

Action upon release
(with 2 seconds release delay)

[Dependent on the "Switching output 
sends" setting]

Switching output sends on change

do not send message •
Status object/s send/s

Switching output sends on change to 1

do not send message •
If switching output = 1 

 send 1

Switching output sends on change to 0

do not send message •

If switching output = 0 

 send 0

Switching output sends on change and 
periodically

Send switching output status

Switching output sends on change to 1 and 
periodically

If switching output = 1 

send 1

Switching output sends on change to 0 and 
periodically

If switching output = 0 

send 0

Threshold value 1/2/3/4

No • Yes

Maintain the

threshold values and delays received via 
communication objects

• never
• after power supply restoration
• after power supply restoration and 
  programming

Содержание Vari KNX 3L-TH-D

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды