20
Setting the parameters
Cala KNX M-T push button
• Version: 13.09.2019 • Technical changes and errors excepted.
5.6.1. AND logic 1+2 and OR logic outputs 1+2
The same setting options are available for AND and OR logic.
Each logic output may transmit one 1-bit or two 8-bit objects. Determine what the out
put should send if logic = 1 and = 0.
If the
output type is a 1-bit object
, set the output values for the various conditions.
If the
output type is two 8-bit objects
, set the type of object and the output values
for the various conditions.
1. / 2. / 3. / 4. Input
• Do not use
- Logic inputs 1...8
- Logic inputs 1...8 inverted
• Temperature sensor malfunction ON
• Temperature sensor malfunction OFF
Output type
• a 1-bit-object
• sends two 8-bit objects
Output value
if logic = 1
1 • 0
Output value
if logic = 0
1 • 0
Output value
If block active
1 • 0
Output value if
monitoring time exceeded
1 • 0
Object type
• value (0…255)
• Percent (0…100%)
• Angle (0…360°)
• Scene call-up (0…63)
Output value object A
if logic = 1
0 … 255 / 100% / 360° / 63; 1
Output value object B
if logic = 1
0 … 255 / 100% / 360° / 63; 1
Output value object A
if logic = 0
0 … 255 / 100% / 360° / 63; 0
Output value object B
if logic = 0
0 … 255 / 100% / 360° / 63; 0
Output value object A
If block active
0 … 255 / 100% / 360° / 63; 0
Output value object B
If block active
0 … 255 / 100% / 360° / 63; 0
Output value object A if
monitoring time exceeded
0 … 255 / 100% / 360° / 63; 0
Output value object B if
monitoring time exceeded
0 … 255 / 100% / 360° / 63; 0
