Elsner 70156, Установка и настройка

Страница: 31 / 52

29 Parameter setting
Weather Station Suntracer KNX sl basic • Version: 26.08.2021 • Technical changes and errors excepted.
When the threshold value per communication object is specified, the starting va-
lue, object value limit and type of change to the threshold value are then set.
From the 1st communication onwards, the threshold value corresponds to the value of
the communication object and is not multiplied by the factor 0.1.
With both of the methods for specifying the threshold values the hysteresis is set.
Switching output
Define which value the output transmits if the threshold value is exceeded or undercut.
Set the delay for the switching and in which cases the switch output transmits.
Start threshold value in 0.1°C
valid until first call -300 … 800; 200
Object value limit (min) in 0.1°C -300 … 800
Object value limit (max) in 0.1°C -300 … 800
Type of threshold change Absolute value • Increase/decrease
Step size
(upon increase/decrease change)
0.1°C • 0.2°C • 0.3°C • 0.4°C • 0.5°C • 1°C •
2°C • 3°C • 4°C • 5°C
Hysteresis setting in % • absolute
Hysteresis in % of the threshold value
(for setting in %)
0 … 50; 20
Hysteresis in 0.1°C
(for absolute setting)
0 … 1100; 50
When the following conditions apply, the
output is
(LV = Threshold value) • GW above = 1 | GW - Hyst. below = 0
• GW above = 0 | GW - Hyst. below = 1
• GW below = 1 | GW + Hyst. above = 0
• GW below = 0 | GW + Hyst. above = 1
Delays can be set via objects
(in seconds) No • Yes
Delay from 0 to 1 none • 1 s … 2 h
Delay from 1 to 0 none • 1 s … 2 h
Switching output sends • on change
• on change to 1
• on change to 0
• on change and periodically
• on change to 1 and periodically
• on change to 0 and periodically
Cycle
(if sent periodically)
5 s ... 2 h