RF-MSG Issued 17.05.2010 The right to make technical alterations is reserved. Errors subject to correction.
4
Installation instructions
Warning, mains voltage!
National legal regulations are to be observed.
Installation, testing, commissioning and troubleshooting of the RF-MSG may only be
carried out by a qualified electrician. Make sure that all cables to be installed are de-
energised and take safety precautions against unintended re-activation.
The RF-MSGs are intended exclusively for their designated use. If used inappropriately
or if the operating instructions are disregarded, any guarantee or warranty claim
expires.
After being unpacked, the device must be immediately be checked for any possible
mechanical damage. The supplier shall be immediately notified in the event of any
transport damage.
The RF-MSGs must not be used if damaged.
If it is assumed that danger-free operation can no longer be guaranteed, the device
must be taken out of service and secured against unintended operation.
The RF-MSGs may only be operated as a fixed installation, meaning in a built-in
condition and upon completion of all installation and commissioning work, and solely in
its intended environment.
Elsner Elektronik shall not be liable for any changes to norms or standards after the
publication of these operating instructions.
