![background image](http://html.mh-extra.com/html/elsner-elektronik/knx-t-ap/knx-t-ap_installation-and-adjustment_2396710007.webp)
6
Connection of the temperature sensor
Remove the screwed on cover. Lead the KNX bus connection cable through the cable
entry on the bottom of the casing and connect the bus +/- to the terminal provided for
this purpose. Screw the cover back on.
Notes on installation
Do not open the temperature sensor if penetration of water (rain) is likely: Only a couple
of drops could damage the electronic.
Maintenance
The temperature sensor should regularly be checked for dirt and cleaned, if required.
Due to safety reasons, the sensor should always be
disconnected from the bus current when performing
maintenance and cleaning works (e.g. by deactivating/
removing fuse).
Содержание KNX T-AP
Страница 1: ...Temperature Sensor KNX T AP Installation and Adjustment ...
Страница 3: ...2 ...