26
KNX Interface for WS1000
• Status: 15.04.2016 • Errors excepted. Subject to technical changes.
If the wind direction sensor is connected directly to the control and transmits on the
bus:
If the reception of the wind direction from the bus is monitored:
2.5.3. Weather data
The menu point appears only if weather data needs to be transmitted on the bus or
received from it.
Weather data is transmitted on the bus
In "General Settings", the option selected is:
Wind direction
• do nor use
[• transmits on bus]
• receives from bus (without monitoring)
• receives from bus (with monitoring)
on change of
(only if transmitting on change)
0.5 m/s • 1.0 m/s • 2.0 m/s • 5.0 m/s
Transmit cycle
(only if transmitting periodically)
5 secs • 10 secs • 30 secs • 1 min • … • 2 h
Use malfunction object verwenden
No • Yes
Sending behaviour
• transmit periodically
• transmit on change
• transmit on change and periodically
on change of
(only if transmitting on change)
0.5 m/s • 1.0 m/s • 2.0 m/s • 5.0 m/s
Transmit cycle
(only if transmitting periodically)
5 secs • 10 secs • 30 secs • 1 min • … • 2 h
Use malfunction object verwenden
No • Yes
Monitoring time
of wind direction sensor
5 secs • 10 secs • 30 secs • 1 min • … • 2 h
Weather data
send to bus
Date and time
• do not transmit
• transmit periodically
• send at request
• send at request and periodically
Transmit cycle
(only if "periodically" is selected)
5 s • 10 s • 30 s • 1 min • … • 2 h
Location coordinates
• do not transmit
• transmit periodically
• transmit on change
• transmit on change and periodically
On change of
(only if "on change" is selected)
0.5 degree • 1 degree • 2 degrees • 5
degrees • 10 degrees
