elsner elektronik 70147, Установка и настройка

Страница: 15 / 26

13 Transfer protocol
Intelligent Power Supply KNX PS640-IP 2U • Version: 21.09.2021 • Technical changes and errors excepted.
24 Duration
2 Send
counter
value „With „“Sending
difference““ the device
sends the time counter
value (in s) of a pre-selected
variable (output current,
output voltage,
temperature) being in the
threshold range.“ 4 bytes CR-T-
25 Counter 2 Send
counter
value „With „“Sending
difference““ and „“Cyclic
sending““ the device sends
the number counter value
(in s) indicating the number
of threshold events (for
output current, output
voltage, temperature).“ 2 bytes CR-T-
26 Threshol
d 2 Send
alarm
status With the measured value
entering the threshold
range a telegram with value
0 or 1 is sent. After
returning to normal
operating and passing
hysteresis a telegram with
value 0 or 1 is sent. 1 bit CR-T-
27 Duration
3 Send
counter
value „With „“Sending
difference““ the device
sends the time counter
value (in s) of a pre-selected
variable (output current,
output voltage,
temperature) being in the
threshold range.“ 4 bytes CR-T-
28 Counter 3 Send
counter
value „With „“Sending
difference““ and „“Cyclic
sending““ the device sends
the number counter value
(in s) indicating the number
of threshold events (for
output current, output
voltage, temperature).“ 2 bytes CR-T-
29 Threshol
d 3 Send
alarm
status With the measured value
entering the threshold
range a telegram with value
0 or 1 is sent. After
returning to normal
operating and passing
hysteresis a telegram with
value 0 or 1 is sent. 1 bit CR-T-
No. Name Function Description Lenght DPT Flags