elsner elektronik 70147, Установка и настройка

Страница: 13 / 26

11 Transfer protocol
Intelligent Power Supply KNX PS640-IP 2U • Version: 21.09.2021 • Technical changes and errors excepted.
6 Temperat
ure
threshold Send
alarm
status With the measured value
entering the threshold
range a telegram with value
0 or 1 is sent. After
returning to normal
operating and passing
hysteresis a telegram with
value 0 or 1 is sent. 1 bit CR-T-
7 Temperat
ure
maximu
m Send
measured
value „After the expired tracking
period with „“Automatic
sending““ the device sends
the measured temperature
value in °C.“ 2 bytes CR-T-
10 Telegram
traffic Send
measured
value „With „“Sending
difference““ and „“Cyclic
sending““ the device sends
the measured bus load
value in %.“ 1 byte CR-T-
11 Telegram
traffic
threshold Send
alarm
status With the measured value
entering the threshold
range a telegram with value
0 or 1 is sent. After
returning to normal
operating and passing
hysteresis a telegram with
value 0 or 1 is sent. 1 bit CR-T-
12 Overload
number Send
counter
value „With „“Sending
difference““ and „“Cyclic
sending““ the device sends
the number counter value
of overloads.“ 2 bytes CR-T-
13 Overload
duration Send
counter
value „With „“Sending
difference““ the device
sends the time counter
value of overloads in s.“ 4 bytes CR-T-
14 Short
circuit
number Send
counter
value „With „“Sending
difference““ and „“Cyclic
sending““ the device sends
the number counter value
of short circuits.“ 2 bytes CR-T-
15 Load
detached
duration Send
counter
value When activated, the device
sends the time counter
value of load detachments
(due to short circuit, device
startup and KNX bus reset). 4 bytes CR-T-
No. Name Function Description Lenght DPT Flags