![background image](http://html1.mh-extra.com/html/elsner-elektronik/70119/70119_installation-and-adjustment_2396591007.webp)
5
Installation and commissioning
KNX L brightness sensor
• Status: 20.12.2019 • Technical changes reserved. Errors reserved.
At least 60 cm of clearance must be left all round the device. Concurrently, the prevents
spray (raindrops hitting the device) or snow (snow penetration) from impairing the
measurement. It also does not allow birds to bite it. Please ensure that the extended
awning does not cast shade on the unit, and that this is not protected from the wind.
Fig. 1
There must be at least 60 cm of space below,
to the sides and in front of the sensor left
from other elements (structures, construction
parts, etc.).
60 cm
Fig. 2
The sensor must be mounted onto a vertical
wall (or pole).
Wall
or
pole
Fig. 3
The sensor must be mounted horizontally in
the lateral direction.
horizontal
Fig. 2
The sensor must be aligned in the direction of
the façade on which shade is to be provided.
Facade
Содержание 70119
Страница 1: ...Item number 70119 EN KNX L Brightness Sensor Installation and Adjustment...
Страница 2: ......
Страница 23: ......