elsner elektronik 70119, Установка и настройка

Страница: 5 / 24

3 Description
KNX L brightness sensor • Status: 20.12.2019 • Technical changes reserved. Errors reserved.
1. Description
The KNX L brightness sensor measures the intensity of illumination and transfers
the value to the KNX system. Six switching outputs with adjustable threshold values
as well as additional AND and OR logic gates are available. The sensor system, the
evaluation electronics and the electronics of the bus connection are mounted in a com-
pact housing.
Functions:
• Brightness measurement : The current light intensity is measured by a
sensor
• 3 threshold values for twilight (up to 1000 lux), 3 for daylight (1-99 klux),
can be adjusted per parameter or via communication objects
• 8 AND and 8 OR logic gates with each 4 inputs. Every switching incident as
well as 8 logic inputs (in the form of communication objects) may be used as
inputs for the logic gates. The output of each gate may optionally be configured
as 1 bit or 2 x 8 bits
Configuration is made using the KNX software ETS. The product file can be down-
loaded from the Elsner Elektronik website on www.elsner-elektronik.de in the “Ser-
vice” menu.
1.1. Deliverables
• Sensor with combined wall/pole mounting
• 2x stainless steel installation band for pole installation
1.2. Technical specifications
Housing Plastic material
Colour White / translucent
Mounting On-wall
Protection category IP 44
Dimensions approx. 96 × 77 × 118 (W × H × D, mm)
Weight approx. 150 g
Ambient temperature Operation -30…+50°C, storage -30…+70°C
Operating voltage KNX bus voltage
Current max. 10 mA, residual ripple 10%
Data output KNX +/- bus terminal plug
BCU type Own micro controller
PEI type 0
Group addresses max. 254
Allocations max. 255
Communication objects 117