3
Installation and commissioning
Adapter plate WS1 Color
• Version: 18/04/2016 • Technical changes and errors excepted.
Elsner Elektronik is not liable for any changes in norms and standards which may occur
after publication of these operating instructions.
2.2. Preparation for mounting
Follow the instructions in the chapter of the same name in the manual for the WS1
Color.
2.3. Mounting the WS1 Color in the WS20 con-
cealed box
Install the WS1 Color weather station in place of the WS20 weather station. Connect
the weather station and the drives/devices to the WS1 Color. In doing so, observe the
instructions in the circuit board overview in the manual for the WS1 Color.
Connect the flat cable to the display circuit board.
Remove the WS1 Color circuit board
from the concealed box and mount it
in the WS20 concealed box.
Screw the WS1 Color display unit onto
the adapter plate with the screws pro-
vided. The nuts must show to the rear.
Position the device such the screw
holes for fastening the adapter plate
remain free.
