![background image](http://html1.mh-extra.com/html/elsner-elektronik/60147/60147_technical-specifications-and-installation-instructions_2396623002.webp)
2
Description
Adapter plate WS1 Color
• Version: 18/04/2016 • Technical changes and errors excepted.
1.
Description
Using the
Adapter plate WS1 Color
, the WS1 Color controller can be mounted on the
concealed box of the older WS20 model.
1.1. Deliverables
•
Adapter plate
•
4 screws 4 × 30 TZD, Torx (DIN WN57)
•
2 screws with locknuts M4–0,7x10 mm, Allen screw (DIN 7991)
1.2. Technical specifications
The product is compliant with the provisions of EU guidelines.
2.
Installation and commissioning
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components within the device.
•
VDE regulations and national regulations are to be followed.
•
Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
•
Do not use the device if it is damaged.
•
Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is no
longer guaranteed.
The device is only to be used for its intended purpose. Any improper modification or
failure to follow the operating instructions voids any and all warranty and guarantee
claims.
After unpacking the device, check it immediately for possible mechanical damage. If it
has been damaged in transport, inform the supplier immediately.
The device may only be used as a fixed-site installation; that means only when assem-
bled and after conclusion of all installation and operational start-up tasks and only in
the surroundings designated for it.
Colours
• white glossy (No. 60147)
• aluminium coloured glossy (No. 601471)
Dimensions
approx. 176 × 176 × 2,5 (W × H × D, mm)