Elseta WCC Lite, Руководство пользователя

Страница: 133 / 160

Figure 18: 4Diac new project window
Figure 19: Simple blinker application
Having less wiring by connecting several signals to same subnet as PCB
designer (such as Altium Designer) as of 4Diac IDE 1.11.3 is not supported.
However, if some parts are used frequently, it is highly advised to have less
wiring by simply compiling several elements into a subapplication. For this, you
would have to select elements to be grouped, press right key and select
New
Subapplication
. You can later change names of such elements and its pins.
In the System Configuration section, drag and drop a FORTE_PC device, an Ethernet segment and
link them (figure 20). For debugging in the local (PC) runtime, leave the address ”localhost:61499”.
For testing on a WCC Lite, enter the IP address of the device, along with the port number (which by
default is 61499 as well).
132