Elseta WCC Lite Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 160

Elseta WCC Lite Скачать руководство пользователя страница 11

2020/04/07

WCC Lite user manual

1 Overview

This document is intended to act as a user manual and explain WCC Lite usage in detail.

It is expected the person referring to this manual is experienced in programmable logic controllers

(PLC), networking (IPv4, ethernet) and the use of the operating system of choice (Windows, Linux,

Mac, etc.).

This document might not cover all of the use cases. For usage not described in this document

please contact

technical support (contact info available on the last page of this document).

2

Hardware and software requirements

In order to get the WCC Liteup and running, a PC/Mac is required, capable of running a web browser
and an MS Excel compatible spreadsheet editor (e.g. LibreOffice or an online spreadsheet editor
such as Google Sheets). A builtin or external Ethernet adapter is also required to connect to the

WCC Lite.

11

1.4.0 | ELSETA | Hardware and software requirements

«
...
9
10
11
12
13
...
»

Содержание WCC Lite

































































































































































Отзывы:

Нет отзывов