Programming to PentaCode® Receiver
The PCKeypad will work with all of Elsema’s PentaCode® series receivers. There
are 2 methods of programming the Keypad to the receiver.
12- Way Dip Switch Coding
1.
Remove the back cover of the keypad using the supplied screwdriver.
2.
Match the 12-way dip switch to the receivers 12-way dip switch.
(DO NOT USE THE DEFAULT FACTORY SETTING FOR THE 12-WAY DIP
SWITCH AS THIS IS A COMMON CODE).
3.
Test the keypad by typing in a valid user pin code.
Encrypted Coding - (All 12-Way Dip Switches must be "Off")
1.
Make sure that all 12-way dip switches are “Off”.
2.
Type in a valid user code. ( the transmitter will transmit for 5 second (default))
3.
With-in the 5 second (or while the transmitter is transmitting) press the program 1
button on the receiver for 1 second.
Содержание PCKeypad
Страница 1: ...User Manual PCKeypad Wireless Keypad...