Elsea TITANUS BL375T, Инструкция по эксплуатации

Страница: 25 / 56

Instruction Manual
TITANUS BL375T 24 REV 00
en
4 . 5 P R O C E D U R E A T T H E E N D O F W O R K
At the end of the work the following steps must be taken:
1.
stop the machine by bringing to 0 all the switches;
2. remove the accessory;
3. cut off power to the machine, by disconnecting the plug from the
outlet.
SHUTTING DOWN
If the product must be stored for a long period of time, store it
sheltered from the weather, then possibly covered. Furthermore:
1. download the dirt contained in the recovery tank;
2. periodically check the condition of the filter.
Before reuse, adequately clean the TITANUS BL375T -and proceed to a thorough visual inspection of
the state of conservation of the same.
5 U N A U T H O R I Z E D U S E
ATTENTION!
Non-permitted uses can lead to electrical shock,
explosion or death
1. Do not leave the operating unit unattended or within reach of children, animals, or people are
not aware of their actions;
2. do not vacuum flammable liquids, flammable (eg. hot ashes), explosive, toxic, electrostatic or
dangerous to the user's health;
3. do not touch the plug and / or socket with wet hands;
4. do not place and not be subjected to splash the appliance with liquids;
5. do not put in traction or lift the machine by means of the electric cable;
6. do not use the device in all situations of uncertainty or abnormalities usually, though not
mentioned in this manual.
6 M A I N T E N A N C E A N D C L E A N I N G
For the purpose of obtaining excellent results and ensure proper use, it requires periodic
maintenance and cleaning, so that it does not change over time the requirements for which it was
created.
The ELSEA SRL has identified work 500h (or at most every year) the maximum period within which it
is appropriate to make a proper control to the machine.
IMPORTANT: The ordinary and extraordinary maintenance must be performed by qualified staff,
always with sectioned electrical system.
ATTE7NTION!
Failure to follow the maintenance and cleaning
instructions can cause irreparable damage to the
machine.