Instruction Manual
OZONO
3
10
REV 24.04.20
3
P R E C A U T I O N S
1.
After removing the packaging, make sure the product is intact. If in doubt do not use the
appliance and contact your nearest service. Plastic bags, polystyrene, etc.must not be left
within reach of children as they are potentially dangerous.
2.
Before connecting the appliance make sure that the rating plate correspond to the mains.
3.
Connect the appliance to power nets which are grounded.
4.
Do not touch the appliance with wet hands.
5.
Do not leave the appliance plugged in as it can be a safety hazard.
6.
This appliance is intended solely and exclusively for the purpose for which it was designed and
the manufacturer can not be held responsible for any damage due to improper use.
7.
Before doing any cleaning or maintenance, be sure to unplug the device from mains by
removing the power plug. Do not wash the equipment with water jets, do not immerse in
water.
8.
In case of breakdown or malfunction switch off the appliance, pull the plug and call the
service center.
9.
All service must be performed by an authorized service center by the manufacturer. Always
insist on the use of original spare parts.
10. Installation should be done according to the manufacturer's instructions (for ventilation
spaces, ambient temperature etc.).
11. It 'important to replace the power cord just has also slightly damaged.
12. Once finished, turn off switches and unplug it from the outlet.
13. Do not remove the devices and security guards.
14. Do not work on the device during operation, before powering down the machine.
SAFETY STANDARD
CAUTION!
Non-permitted uses can lead to electrical shock,
explosion or death
1.
All current-carrying parts must be protected against the water jet;
2.
Operation with a safety differential switch provides additional protection for the user (IDn =
30mA);
3.
Do not touch the appliance with wet hands;
4.
Use the device uniquely in work situations for which it was designed and built.
