ELSA LANCOM Wireless L-II, Руководство пользователя

Страница: 24 / 71

Installation
|
|
ELSA LANCOM Wireless L-II
|
24
EN
The TCP/IP protocol is installed on the system and there is no DHCP
server on the LAN
In this case, the LANCOM activates the DHCP server in automatic mode. It
assigns IP addresses in the range of 10.x.x.x. You can assign a fixed IP
address to the
LANCOM or let it be assigned automatically. In the later case,
the LANCOM is assigned the address 10.0.0.1.
The TCP/IP protocol is installed on the system and there is already a
DHCP server on the LAN
The LANCOM acquires its IP address from the DHCP server on the LAN.
LANconfig finds the LANCOM at its address. The setup wizard asks for a
static IP address. Because the address is previously unknown, you cannot
access the
LANCOM using WEBconfig .
The TCP/IP protocol is installed on the system with a fixed IP
address
In this case, LANconfig finds LANCOM at the client computer's address,
which ends in 254 (x.x.x.254). The setup wizard asks for a static IP address.
2.7.1 The Wizards
The following wizards, which make it very easy to set up and configure the
ELSA LANCOM Wireless L-11 , are available in ELSA LANconfig and ELSA
WEBconfig : Various wizards are offered, depending on whether your ELSA
LANCOM Wireless L-11 has only the standard network connection or
whether the DSL option is installed:
ELSA LANCOM Wireless L-11 with network connection (standard)
Basic settings
Changing security settings
ELSA LANCOM Wireless L-11 with DSL option (optional)
Basic settings
Changing security settings
Setting up Internet access
Selecting the Internet provider
100235 Wireless L-11.book Seite 24 Montag, 30. Oktober 2000 5:43 17