ELSA LANCOM Wireless L-II, Руководство пользователя

Страница: 18 / 71

Installation
|
|
ELSA LANCOM Wireless L-II
|
18
EN
Setting fixed IP addresses (not using DHCP)
If you are not going to use a DHCP server on your network, assign the
workstations fixed IP addresses:
Start Settings Control Panel
Network Protocols Properties . This tab also lets you set the
standard gateway.
Assign unique IP addresses, for example taken from a reserved range of
addresses. For example, the workstations can be assigned addressed
from '10.1.1.2' to '10.1.1.253', the router can be given '10.1.1.1' and all
can have the subnet mask of '255.255.255.0'. To test whether or not a
specific IP address, such as '10.1.1.1', is free, enter
ping 10.1.1.1
in a DOS session. If you do not receive a response, the address is most
likely free.
Entering the DNS server (not necessary when using DHCP)
On the workstation computers, specify the address of the local network
router as the Domain Name Server (DNS server) on the 'DNS' tab. Also
enter a host name on the DNS configuration page. In doing so, use the
name of the PC, which ideally matches the user's name, to maintain a
certain amount of consistency.
100235 Wireless L-11.book Seite 18 Montag, 30. Oktober 2000 5:43 17