ELSA LANCOM Wireless IL-II, Руководство пользователя

Страница: 78 / 100

Operating modes and functions
|
|
ELSA LANCOM Wireless IL-II
|
78
EN
the LCR will start at the beginning after unsuccessfully trying the last
network prefix.
햵
If you have also made entries in the LCR table for holidays, open the Pub-
lic holidays list. Enter each holiday with its full date (DD.MM.YYYY).
햶
Check the internal clock of the unit (incl. the date), to ensure that the LCR
activates the routing at the correct time (see also 'Time for the Selection'
further below).
Build the LCR table one step at a time and check your results. Open the ELSA
LANmonitor, for example, and establish connections to the remote stations
to be rerouted according to the table using the ELSA LANCAPI. Use the dialed
number to verify whether the LCR settings suit your requirements. For router
connections, check the log file for the number dialed (LANmonitor:
View
Options Protocol Display ).
Time for the selection
It goes without saying that the internal clock of the ELSA LANCOM
Wireless IL-11 must be set properly to ensure that the least-cost router cor-
rectly applies the information in the table. The router can also help itself in
this respect as well, however: It can synchronize its internal clock with the
time in the ISDN, either when switched on, or during each call establishment.
햲
In ELSA LANconfig , switch to the 'Date/Time' tab in the 'Management'
configuration section.
햳
Activate the option for automatic synchronization at each call establish-
ment. If you would rather enter the time manually, disable this option.
100324 Wireless IL-11.book Seite 78 Montag, 30. Oktober 2000 4:13 16