Installation
|
|
ELSA LANCOM Wireless IL-II
|
32
EN
ically to help you with the basic configuration of the unit; it can also perform
the complete basic configuration for you.
The start page for automatic configuration does not appear in all described
cases. In some cases you are asked to enter an IP address in the next step
(
햴
).
햲
Start the new software with
Start
Programs
ELSAlan
ELSA
LANconfig
.
햳
Select the option 'All settings to be defined automatically' if you are
not
familiar with networks and IP addresses and one of the following condi-
tions applies:
You have not yet used IP addresses in your network but would like to
do so starting now. You are not concerned about the specific IP
addresses that will be used. The router as a DHCP server will auto-
matically set and assign the IP addresses for all devices in the net-
work (LAN and WLAN).
or
You do not want to use IP addresses because you are using a pure
Windows network, for example.
If you are not sure whether your network already uses IP addresses, click on
Start
Run
, enter
winipcfg
on the command line and click
OK
. If the
next window shows the value '0.0.0.0' in the field 'IP address', the computer
has never had an IP address.
Under Windows NT you can check IP addresses with the command
ipconfig
.
100324 Wireless IL-11.book Seite 32 Montag, 30. Oktober 2000 4:13 16
Содержание LANCOM Wireless IL-II
Страница 1: ...ELSA LANCOM TM Wireless IL II 100324 Wireless IL 11 book Seite 1 Montag 30 Oktober 2000 4 13 16...
Страница 4: ...ELSA LANCOM Wireless IL II EN 100324 Wireless IL 11 book Seite 4 Montag 30 Oktober 2000 4 13 16...
Страница 8: ...ELSA LANCOM Wireless IL II EN 100324 Wireless IL 11 book Seite 8 Montag 30 Oktober 2000 4 13 16...
Страница 96: ...Appendix ELSA LANCOM Wireless IL II 96 EN 100324 Wireless IL 11 book Seite 96 Montag 30 Oktober 2000 4 13 16...