ELSA LANCOM Wireless IL-II, Руководство пользователя

Страница: 65 / 100

|
Operating modes and functions
65
|
ELSA LANCOM Wireless IL-II
|
EN
Dialing prefix
Number to precede outgoing calls, e.g. the prefix for external calls when
using a PBX.
4.3.3 Router interface settings
The router interface settings for the ELSA LANconfig can be found in the
'Communication' configuration section on the 'General' tab, or under
/Setup/WAN-module/Router-interface-list
during Tel-
net or terminal sessions.
The router interface settings determine the parameters to be used for each
interface (i.e. each S
0
port) while in router mode. These parameters do not
apply to the other operating modes of the units. Specifically, they are:
Subscriber numbers (MSN/terminal device selection numbers)
The router responds to incoming calls for these numbers. Multiple num-
bers are separated by semicolons. If no subscriber number is specified,
the router will respond to all incoming calls.
The first subscriber number specified will be transmitted to the remote
station during the active establishment of a connection. If no number is
specified, the main MSN of the connection will be transmitted.
Option for Y connections
Enable this option if it should be possible for both B channels of the con-
nection to establish parallel connections to different remote stations.
Suppression of own subscriber number
Enable this option in order to suppress the display of your own subscriber
number to the remote station during call establishment.
This function must be supported by the network operator.
4.3.4 Layer list
The list of communications layers in the ELSA LANconfig can be found in the
'Communication' configuration section on the 'General' tab, or under
/Setup/WAN-module/Layer-list
during Telnet or terminal ses-
sions.
A layer defines a specific combination of protocol settings to be used for data
transfer to other devices. Specifically, they are:
100324 Wireless IL-11.book Seite 65 Montag, 30. Oktober 2000 4:13 16