ELSA GLoria-L, Руководство пользователя

Страница: 14 / 60

Installing the Graphics Board and Adding Memory
ELSA GLoria-L, -L/MX, -XL, -XXL
8
Only use the memory expansion developed by ELSA for upgrading the graphics memory
on ELSA graphics boards. ELSA accepts no responsibility for warranty and support if you
use third-party memory chips.
The memory chips developed by ELSA are specially designed for use in ELSA graphics
boards. This practically excludes the risk of problems such as incorrect colors for individ-
ual pixels. Please consult our Support service in the unlikely event that you still experi-
ence video errors.
Installing the Memory Chips in the GLoria-L and GLoria-L/MX
You can add 8 MB texture memory if your
GLoria-L or GLoria-L/MX has free sockets (40-
pin SOJ sockets).
Make sure that the chip is correctly oriented in the socket
when you are fitting the memory chips. The socket and
the memory chip are marked with a notch, a chamfer or
a dot. These must match up when the memory chip is in-
serted in the socket.
Installing the Memory Module in the
GLoria-XL and GLoria-XXL
The socket for the 16 MB memory module on the GLoria-XL and GLoria-XXL is located at
the back end of the graphics board (opposite the mounting bracket).
Position of the four DRAM sockets
for texture memory upgrade
Memory module socket