Page 12
3EE490044EU – 09/19
ELRO-Werke AG
Wohlerstrasse 47
5620 Bremgarten
5.
MANUAL MENU
3 cooking modes: Convection, Steam and Combined (from 0 to 100%)
Display of actual and set temperature
Selects preheating before cooking. To deactivate press for 3 seconds
Display of times / core temperature
Ventilation speed (1 to 100%)
Vent outlet
Manual humidification
Rapid cooling & Holding mode (hot cupboard)
Plated meal regeneration
Add a cooking phase
Quick save a recipe
Touch screen (alternative to using the select knob)
Date and time
STOP / START cooking. Changes colour when:
Before cooking starts:
Coloured green
Cooking :
Coloured yellow
Pause (door open) :
Coloured yellow
Cooking finished :
Coloured red
Water hardness limitations for steam mode:
Depending on steam usage levels, action may be required to treat hard water to avoid a build-up of lime scale in the boiler and excessive
consumption of descaling product.
Steam usage level
Water hardness
GN 1/1 oven
GN 1/1 oven
Medium
(3 to 7 hours/day)
Max 40°f
(28°e, 22°d, 400ppm)
Max 20°f
(14°e, 11°d, 200ppm)
Intensive
(>7 hours/day)
Max 20°f
(14°e, 11°d, 200ppm)
Max 10°f
(7°e, 6°d, 100ppm)
5.1 DEFERRED START
This function is only available in manual mode, not with a programmed menu
At the start point for cooking press and hold START and turn the coder knob anti
clockwise to programme a « negative time » corresponding to the delay before
cooking starts.
The setting is validated after 5 seconds or by touching another zone/button
For example:
Display « -7:30 » : signifies that cooking will start in 7h and 30 minutes.
The cycle start button will flash in yellow and the countdown will run from « -7:30 » to
« 00:00 » until the selected cooking starts (this can still be changed).
NOTE: if an automatic wash cycle has been programmed this will not take place
