X101532E
17
4.15 Mobile appliance
*)
1 Appliance back side
2 Protection hood
3 Appliance cable clamp
4 Steering and locked castors
5 Mains supply
4.15.1 Initial operation
Operate the appliance only on a level floor. When placed on a sloping floor,
the appliance must be levelled out with an underlay. Position the appliance
correctly. Avoid accidental shifting of the appliance. Lock (
A
) the steering
castors (4).
4.15.2 Connection
Open the protection hood (2) on the appliance back side (1).
Connect all media connections to the mains supply (5). You can start the
appliance.
4.15.3 Disassembly
Put the appliance in the horizontal (level) position and close the appliance
lid.
(
A
) Turn off the appliance. Empty the cooking chamber.
Never
move the appliance with hot food!
Remove all media connections.
Never pull the plug out of the socket
with the cable
. Install the connection cable. Place the connection cable in
the clamp (3). Make sure that cables/hoses are stored so that they are not
rolled over when moving the appliance. Unlock the steering castors (4).
Move the appliance with caution and with the greatest care!
Never pull the
appliance with the cable
.
Make sure that there are no persons or objects
in the way when moving the appliance on a sloped floor. Always move the
appliance with the help of a second person.
4.15.4 Cleaning
Refer to the chapter Cleaning in this instruction manual.
4.15.5 Maintenance
Make sure the media connection cables (electricity, water, steam) are never
under tension. These should never be exposed to traction!
If the connection cable/hose has been damaged in any way (squashed or
cut), the appliance may not be put into operation. The connection
cable/hose must be replaced! The replacement cable must correspond with
the original one. In addition the cable type must be suitable for use in
professional kitchens (temperature, oil resistance). Check the steering and
locked castors (4) functions on a regular basis.
5
2
3
4
1
A
