ELPRO TPA110 SERIES, Инструкция по установке и эксплуатации

Страница: 18 / 28

If the section of CAT5 cable exceeds 50% of the maximum section that can be
compensated (see above):
5.3 Turn the MEDIUM trimmer to maximum (completely clockwise).
5.4 Adjust the LONG trimmer on the front panel of the TPA110 R / IRR receiver
unit until the amplitude of the burst on the pedestal is between 210 and 300mVpp
5.5 Check that the amplitude of the negative synchronism is between 250 and
300mV
WARNING
The trimmers are factory set for minimum
compensation (counterclockwise)
of 50 mt. of AWG26 CAT5 cable.
If you have purchased the dual TPA110 IRT / IRR, arrival of a correct video
signal is indicated by lighting up of the
green led located between the two
adjustment trimmers. if the green led is off, this means that there is no correct
video signal on the output
.
4.0 INSTALLATION
system, the CAT6
18 7
TPA110
series
CAT5/6 VIDEO, AUDIO & IR TRANSCEIVERS
TPA110
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
ELPRO Video Labs s.r.l.
Sync =
250÷300mV
Burst =
210÷300mV
LED PRESENZA VIDEO
Audio LEVEL trimmers