ELPRO TPA110 SERIES, Инструкция по установке и эксплуатации

Страница: 7 / 28

4.0 INSTALLATION
In a typical installation, there are usually 2 independent video sources to be
directed towards two destinations. A CAT5 cable is used for transmission between
the transmission and receiving units. The CAT5 cable is the standard cable used
for local computer networks and consists of four unshielded twisted pairs (UTP).
The maximum lengths of the CAT5 cable that can be compensated are:
-375mt. for cable type AWG26
-500mt. for cable type AWG24
-650mt. for cable type AWG22
For monitoring and signal present type applications, sections of up to 900mt of
AWG22 CAT5 cable can be used.
In critical noise conditions, in order it improve the all-round performance of the
system, the
CAT6 cable can be used.
WARNING
Pay particular attention to grounding
of the sources and destinations (see par. 4.2)
4.1 Connection of the CAT5 cable
18 7
TPA110
series
CAT5/6 VIDEO, AUDIO & IR TRANSCEIVERS
ELPRO Video Labs s.r.l.
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
Tel.+39 0119348778 - FAX +39 0119348779
300mV