ELPRO RT2e, Руководство по эксплуатации

Страница: 9 / 22

EN - 9 Wireless Sensor RT2e
EL6107E
W i r e l e s s S e n s o r R T 2 e
IT
ES
EN
EN
FR
IT
ES
In the event of a poor test result, shifting the wireless sensor can lead to an improvement in the radio
connection

2.1 Antenna position .
If no radio connection can be established, the channel settings should be checked.
Radio channel
change

If the radio channel needs to be changed during operation, it is necessary to briefly press the SET key
after selecting the new channel.
3.2 Operation
Undisrupted operation is indicated by a green, blinking light of the status indicator at intervals of 10
seconds.
Status indicator

3.3 Maintenance
Maintenance
schedule

To ensure proper functioning of the wireless sensor, the following steps should be part of a periodic
maintenance schedule:
- Calibrate wireless sensor
- Replace batteries

5.4.2 Accessories
Replacing battery

Monitoring of the battery is based on an energy consumption count. For this reason, only the specific
manufacturer recommended battery should be used. Do not remove the battery from the wireless sensor
when it is not in use. The use of third party batteries or removal of batteries will produce incorrect status
information at the battery indicator.
Status display - test result
Quality of the radio connection Blinks, number Color
good radio connection 100% 5 green
80% 4 green
60% 3 green
40% 2 green
poor radio connection 20% 1 green
No radio connection or wrong settings* 1 red
Status indicator - Operation
Quality of the radio connection Blinks, number Color
good radio connection 1 green
No radio connection or wrong settings* 1 red
AFTER THE BATTERIES ARE CHANGED, THE SET KEY MUST BE PRESSED AND HELD
FOR 6 SECONDS, OTHERWISE THE ENERGY COUNTER WILL NOT FUNCTION