11
4.6 MATRIX IR ID
：
：
：
：
(Default IR ID: 4)
This function must be set to match the Matrix remote control IR01 with the matrix itself.
Conflicts with other devices remote control is therefore avoided.
After entering MATRIX IR ID menu, press ENTER, the LCM LINE 1 number will flash.
Then Press UP or DOWN button to select the number, and then press ENTER to confirm.
When finish MATRIX IR ID setting, MATRIX remote control IR01 must also set the same
ID in order to operation in normal.
When you finish the MATRIX IR ID setting, the remote control IR01 that will control
locally the matrix, must be setted with the
same ID
in order to perform the right
operations. (See 5.1)
Remote IR ID setting mode: Press and hold the POWER button, then press the
number button which can be set from 0 to 9, total 10 groups. (See 5.1)
These settings on IR01 remote control have to be done the first time you use the IR01
or when you change the batteries.
MATRIX IR ID 4
EL
EL
EL
EL----MX
MX
MX
MX----B004
B004
B004
B004
M
A
T
R
I
X
I
R
I
D
4
IR01
＋
