1000465V01 DOC - ECOLOG-PRO 2PTR and 1THR - Operation Manual_EN.docx | Page 3 / 15
Conformity and Symbols Used
Hereby, ELPRO-BUCHS AG declares that the radio equipment type
ECOLOG-PRO 2PTR
868 MHz
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available in chapter 5 of this document or at the following internet address:
https://www.elpro.com/fileadmin/Docs/Quality_Documents/ECOLOG-
PRO_2PTR_DOC_Conformity_1000279V01.pdf
Hereby, ELPRO-BUCHS AG declares that the radio equipment type
ECOLOG-PRO 1THR
868 MHz
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available in chapter 5 of this document or at the following internet address:
https://www.elpro.com/fileadmin/Docs/Quality_Documents/ECOLOG-
PRO_1THR_DOC_Conformity_1000281V01.pdf
Above mentioned products operate in the 863-870MHz band with a maximum radiated output power
of +11.6dBm.
ECOLOG-PRO 2PTR 915 MHz and ECOLOG-PRO 1THR 915 MHz
Above mentioned devices comply with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Above mentioned devices operate in the 902-928MHz band with a maximum radiated output power
of +4dBm.
ECOLOG-PRO 2PTR 915 MHZ contains
FCC ID: S9NSPSGRFC
IC: 8976C-SPSGRFC
ECOLOG-PRO 1THR 915 MHz contains
FCC-ID: S9NSPSGRFC
IC: 8976C-SPSGRFC
Devices have to be disposed of according to WEEE (Waste Electrical and Electronic Equipment,
2002/96/EC).
