1000465V01 DOC - ECOLOG-PRO 2PTR and 1THR - Operation Manual_EN.docx | Page 8 / 15
3.
Measurement Module ECOLOG-PRO 1THR
front view
bottom view
Functional characteristics:
ECOLOG-PRO 1THR is a measurement module with one external combination probe for temperature
and relative humidity. Communication from this module with the ECOLOG-PRO RBR is via radio signal.
Power supply
3 AA Alkaline batteries
SAFETY INSTRUCTIONS!
Improper use or misuse of batteries may result in leakage of battery fluid or, in
the worst case, explosion and/or fire. Please note:
Always choose the correct type of battery that best suits your intended
use (see 'Measurement range').
So that battery status can be determined correctly, always insert new,
unused batteries when changing batteries.
Never insert different types of batteries into the device at the same
time.
All batteries should be replaced at the same time. Mixing old and new
batteries may cause the batteries to leak and damage the product.
Make sure that the battery contacts and mating contacts in the device
are clean before inserting the batteries.
Make sure that the batteries are inserted properly i.e. observe polarity
(+ and -).
Remove the batteries if you are not going to use the product for a
longer period of time to avoid damage from leakage. Leaking or
damaged batteries can cause acid burns on skin contact. When handling
damaged batteries, you should wear protective gloves.
Remove expired batteries immediately from the device.
Do not disassemble batteries, do not short-circuit them and do not
throw them into fire. Never try to charge non-rechargeable batteries.
There is a danger of explosion!
Keep batteries out of reach of children. Do not leave batteries lying around as
they may be swallowed by children or pets.
Battery life
14 months (provided that the module's radio connection is stable and that the
defined temperature range (see below) is maintained)