Elpidan E2000, Руководство пользователя

Страница: 12 / 16

Automatically power off without any operations
within 5min.
System Reset:
Press and hold "MODE/RESET" key until the full
screen displays with two beeping, the system
resetting is successful.
Note: system resetting is mainly used for
the return of error operation and error
calibration.
Calibration:
Calibration adjustment is the process of setting
the gauge to be more accurate. There are factors to
affect accuracy such as the probe slight wear, long
time no use, hostile environment, or special substrate.
How to calibrate the gauge, steps as follows:
Firstly take out the two pieces of substrates
(ferrous substrate/ aluminum substrate) and the five
standard foils
(50um/100um/250um/500um/1000um). Place them
horizontally on the table. You also could use your
target bare metal substrate instead of our attached
substrates.