ELOVIS mSPEED smartsensor Скачать руководство пользователя страница 4

PROHIBITED USE 

The user, owner, to be called here "the customer" must be aware of the following use 
restrictions: 

1. The customer may use the "products" only for their intended use and must not 
divert them from their initial purpose. This concerns in particular possible harm to 
persons caused by disregarding laser safety guidelines. 
2. The customer must not open the "products". 
3. The customer must not modify, extend, transform, copy or decompile the hardware 
and software contained in the "products". 
4. The customer agrees not to duplicate the product in any way whatsoever. 

The list does not pretend to be complete! 

In case of infringement, the ELOVIS GMBH rejects all claims for damages but it 
shall itself make such claims. 

WARRANTY 

The equipment has been carefully tested both mechanically and electrically prior to 
shipment. It has also been verified, as far as possible, that the equipment is in good 
working order. 

  We guarantee good working of the equipment for a period of 12 months 

beginning on the day the equipment is ready to be shipped at our plant. We 
promise to repair or replace at will, as quickly and reasonably as possible, any 
parts which are proven to be faulty in design, material or workmanship. 

  Warranty begins from the moment, the equipment is ready to be shipped at our plant. 

  In cases where we undertake assembly and/or initial operation, the warranty begins 

from the day of initial operation. 

  Our liability is limited to direct damages only. 

  Our warranty shall not cover replacements or repairs which are due to normal wear and 

tear. 

  Faulty construction of buildings 

  Likewise excepted from the warranty are: 

–  faulty or negligent maintenance 
–  disregard of operating instructions 
– overloading 
–  use of unsuitable materials 
–  incorrect assembly works 
–  faulty electrical connections 
–  acts of God, and any other cause beyond our control 
 

 Our "General Terms and Conditions of Sale" (ELOVIS.AGB), of which the above 

text is an excerpt, are binding for all warranty cases. 

Imprint 

ELOVIS GmbH, Karl-Friedrich-Str. 14-18, D-76133 Karlsruhe, Germany 
File: e_manual-uSpeed-Sensor.doc 
Date of memorization: 08.02.2008 16:06:00 Size: 1107968 Byte 
Update number: 117 
Dokument ID: 18

 

ID308

  

IV 

Содержание mSPEED smartsensor
























Отзывы: