Operating Instructions No. 9999-043-0
Seite 8
B7215e01_2.pmd
Rel. 1 vom 10.09.2003
If the electronic lock is opened while programmed automatic closure is active, then the green LED will blink every 2 seconds during
the 10-second open phase.
10.7 Programming automatic locking
Can be programmed only with the electronic lock open and only with the master combination.
This programmed function automatically locks the electronic lock after 10 seconds.
Function
Operation, button(s)
Response
Initiate programming
Select P No. 4
Confirm the entry
Enter 6-digit master combination, e.g.
Confirm the entry
Enter
Confirm the entry
Cancel
Comments
Green LED blinks once
OK = green LED lights and
low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.
IMPORTANT!
The lock will close automatically
after
10
seconds.
10.7.1 Deleting automatic locking
Function
Operation, button(s)
Response
Initiate programming
Select P No. 4
Confirm the entry
Enter 6-digit master combination, e.g.
Confirm the entry
Enter
Confirm the entry
Abbruch
Comments
Green LED blinks once
OK = green LED lights and
low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.
IMPORTANT!
After the function is deleted
the lock will automatically
close one more time after 10
seconds have elapsed.
Can be programmed only with the electronic lock open and only with the master combination.
10.8 Programming an override combination
An override combination (permitting immediate opening even if a time-lock period has been specified) can be set
up for the first time only by the master combination owner.
Changes may be made with either the master combination or a user combination.
Programming is possible only with the electronic lock open.
User 9 is defined as the override combination. If override is not desired, then user 9 may not be
programmed!
Funktion
Operation, button(s)
Response
Initiate programming
Select P No. 1
Confirm the entry
Select user number 9 °
Confirm the entry
Enter the 6-digit master or user combination, e.g.
Confirm the entry
Enter the 6-digit override combination
Confirm the entry
Enter the override combination again to confirm
Confirm the entry
Cancel
° Only one override
combination can be
programmed.
9
8
7
6
5
4
If there is an error in
programming, then the
previous override
combination will remain
valid.
Comments
Green LED blinks once
OK = green LED lights and
low-high tone sounds.
Error = 12 high-pitched
tones and red LED lights.
9
8
7
6
5
4
Close the lock:
Press any digit button.
